[ 1 ] will be high foot 3 is screwed on the main group 1, and the copper gasket and 2 and O ring 4 is arranged on a tall 2 4 bottoms up in the basin
[ 2 ] rubber gasket 5 is arranged in the basin will be below the high foot, then 6 feet high on the nut in 3 into a tight
[ 3 ] the inlet hose 7 is connected with the group of 1 other head connected to a source of water
[ 4 ] open source open various function switch check whether leakage; a group of subjects is loose; whether the function of failure
1 fixed seat
2M4 self-tapping screws
3 hand shower set
4 decorative cover
5 - foot joint
6 plain washers
7 lifting rod
8 top shower head
The 9 body
10 water separator
11 manual
Before installing the product please refer to the A maps provide the embedded pipe height dimension
Embedded two water products [ size is in ground water quality height is about 800mm two outlet goods center distance 150mm
[ 1 ] will map - two - foot joint 5 installation of embedded water outlet
[ 2 ] of the lifting rod 7 is connected with the main body 9. Put the two decorative cover 4 is screwed on the curved foot joint 5 [ wall ] then two flat washer two six nut [ 11 ] angle, will connect the whole body and mounted two is screwed on the foot joint 5 is connected.
[ 3 ] connection body 9 is also required to fix the fixing seat 1, a reference A embedded water outlet and the fixed seat size, and then install [ M4 1 ] self-tapping screw fixation
[ 4 ] on the top shower head and hand shower set.
[ 5 ] open source, open various function switch, check no leakage can sealing wall.
An instruction manual
[ ] in 1 normal under pressure from the top sprinkler sprinkler spray, such as the pull rod is pulled up, switching to a hand-held shower water, whereas the top sprinkler sprinkler water
[ 2 ] top shower head capable of 60 degree radial swing